Microsemi Security Forum Takes Place Tuesday, March 14 From 9:45 a.m. to 4:30 p.m.
WHAT: Microsemi Corporation, a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, will be participating in Embedded World 2017 March 14-16, 2017 at the Exhibition Centre in Nuremburg, Germany. Microsemi will be exhibiting in Hall 1, booth #1-660, where experts will be on hand to discuss the company’s recently introduced cost-optimized lowest power PolarFire™ field programmable gate array (FPGA) family and demonstrate its Libero® SoC PolarFire software, motor control and thermal imaging solutions; LX3301 inductive sensor interface integrated circuit and RISC-V intellectual property (IP) core running on an IGLOO™2 FPGA device.
The company will also be hosting the Microsemi Security Forum, a one-day, highly informative forum focused on the technology needed to secure critical infrastructure, on Tuesday, March 14 from 9:45 a.m. to 4:30 p.m., followed by a networking reception at Microsemi’s booth. During the forum, Microsemi security experts will provide an in-depth overview of the company’s most advanced secure FPGAs and system-on-chip (SoC) FPGAs, cryptographically secure Ethernet and storage products and GPS security solutions. To register for the Microsemi Security Forum, click here. https://www.microsemi.com/for
At Embedded World on Wednesday, March 15 from 2-2:30 p.m. Ted Marena, director of SoC FPGA marketing for Microsemi, will share his expertise in a presentation titled, “What is SEU and How to Leverage SEU Immune Devices for Safety Critical Designs.” Marena will also be presenting “Demystifying IEEE 1588 for Industrial Designs” at the tradeshow on Thursday, March 16 from 10-10:30 a.m. Richard Newell, senior principal product architect for Microsemi’s SoC Products Group, will be teaching an Embedded World session titled, “Security-Hardened RISC-V Microprocessors” on March 15 from 10:30-11 a.m. during class 11: The ESCRYPT Class: A Multi-Layered Approach to Embedded Security.
In addition, Microsemi will be hosting an in-booth theater with informative sessions named, “Rethink FPGAs: Microsemi FPGA Forum,” March 14-16 during Embedded World exhibition hours. These sessions will focus on Microsemi’s new mid-range density PolarFire FPGA family, FPGA-based functional safety and the RISC-V soft IP processor core for embedded designs led by Rick O’Connor, executive director of the RISC-V Foundation. PolarFire and RISC-V sessions will also be hosted at the Arrow Electronics booth, #4A-340. To register for these sessions, click here. https://www.microsemi.com/indu
WHY: The Embedded World Conference spans the entire spectrum of hardware, software and tools for the development of embedded systems. As the conference focuses on embedded systems, Microsemi’s PolarFire FPGA applications for industry 4.0 as well as those for the broader industrial market will be highlighted at the trade show, including factory automation, industrial Ethernet switches, video and image processing, machine vision, programmable logic controllers, portable test equipment and medical.
WHERE: Microsemi’s Embedded World booth #1-660 is located in Hall 1 at the Exhibition Centre located at Messezentrum 1, 90471 in Nuremberg, Germany. The company’s Security Forum will take place in the Exhibition Center, first level, NCC Mitte, room Munchen 2, and feature presentations from several Microsemi experts, including a lunchtime keynote by the company’s Chief Technology Officer Jim Aralis.
WHEN: Microsemi’s involvement in the conference will take place Tuesday, March 14 through Thursday, March 16 during show hours.
– Microsemi’s Security Forum will take place March 14 from 9:45 a.m.-4:30 p.m. local time with a networking event following the forum. To register ahead, click here or contact SecurityForumEU@microsemi.com with any questions.
– During class 11: The ESCRYPT Class: A Multi-Layered Approach to Embedded Security, Newell’s session titled, “Security-hardened RISC-V Microprocessors” will take place March 15 from 10:30-11 a.m. local time.
– Marena’s “What is SEU and How to Leverage SEU Immune Devices for Safety Critical Designs” presentation will take place March 15 from 2-2:30 p.m. local time and “Demystifying IEEE 1588 for Industrial Designs” presentation will take place March 16 from 10-10:30 a.m. local time.
In addition, Microsemi technical experts and system architects will lead scheduled sessions on PolarFire FPGAs and embedded solutions at Microsemi’s and Arrow Electronics’ booths. To register ahead for these sessions or learn more, click here.
WHO: Attending the Embedded World Conference has long been a must for embedded systems designers and developers, trend-setters in the embedded technologies sector and members of the avant-garde of a technology set.
For more information on Microsemi’s involvement with Embedded World, or to schedule an on-site meeting at the event, contact Farhad Mafie at 949-356-2399 or farhad.mafie@microsemi.com.
