Elnec, Europe’s leading Device Programmers manufacturer offers new series of extremely fast multiprogramming systems, optimized for programming NAND and NOR Flash memories.These new programmers are able to decrease programming times of NAND and NOR Flash memories up to 70% in comparison to its predecessors. Despite the programming speed, the appeal of these new systems is its universality. They can program more than 53,000 different devices.New series of multiprogramming systems, designated for programming medium sized batches of devices above all, consists of programmers BeeHive204 and BeeHive208S. The Bee Hive 204 is aconcurrent multiprogramming system designated for high volume production programming with minimal operator effort.
The programmer has four Elnec:
New series of extremely fast multiprogramming systems designated fo r programming medium sized batches of devices above all, consists of programmers BeeHive204 and BeeHive208S. The Bee Hive 204 is aconcurrent multiprogramming system designated for high volume production programming with minimal operator effort.
The programmer has four Elnec:
New series of extremely fast multiprogramming systems independent programming modules. Each programming module starts programming at the moment a chip is detected in the socket – independent of the status of other programming modules. For example, three modules can be performing a program, verify or blank check operation while the operator is replacing a programmed chip with a blank one. The BeeHive204 reliably programs a wide range of programmable devices in the ZIF socket with more than 800 models of socket converters available. Programming is also available through the ISP connector. It is important to note that Elnec,s software allows two BeeHive204 programmers to be connected and operated simultaneously from one PC, making for even more flexible production solution.
The Stand-alone concurrent multiprogramming system, the BeeHive208S has eight independent programming modules. Except of higher number of programming modules, this programmer differs from the BeeHive204 by its stand-alone mode of operation. That means that the programmer does not have to be connected to an external PC while in operation. The BeeHive208S can be controlled simply through touch screen display and Windows XP Embed operating system. A 320 GB hard disc drive and the ability to upgrade the software using a Flash drive ensures a reliable production solution without any additional costs. As mentioned earlier, the programming speed increase for serial and parallel NAND and NOR Flash memories means, in absolute numbers, that new series of programmers can program and verify a 64 Mbit NOR Flash in less than 13s and program and verify 1Gbit NAND Flash in less than 123s.
Contact: www.elnec.com / elnec@elnec.com
